ANSI C99 JSON serializer / deserializer

To read JSON input one has to create a parser that will call a given callback for every decoded JSON document inside the stream. There are flags that control the behaviour of the parser (they can be combined with binary or):

• CJSON_PARSER_FLAG__ALLOWDUPLICATEKEYS enables the parser to allow duplicate keys inside JSON Objects
• CJSON_PARSER_FLAG__STREAMINGMODE enables streaming mode. In this mode the parser is capable of continuing parsing after the first document that has been encountered. If this bit is not set any data following the first root element is an syntax error

static enum cjsonError documentReadyCallback(
    struct cjsonValue* lpDocument,
    void* lpFreeParam
) {
    /* Do whatever you want with the document */
    return cjsonE_Ok;
}

struct cjsonParser* lpParser;
enum cjsonError e;

e = cjsonParserCreate(
    &lpParser,
    0, /* Or CJSON_PARSER_FLAG__ALLOWDUPLICATEKEYS|CJSON_PARSER_FLAG__STREAMINGMODE */
    &documentReadyCallback,
    NULL,
    NULL
);
if(e != cjsonE_Ok) {
    /* Perform error handling */
}

After that one has to feed the parser with bytes from the input stream and after finishing input one has to release the parser again:

for(...) { /* Iterate over input bytes */
    e = cjsonParserProcessByte(lpParser, nextInputByte);
    if(e != cjsonE_Ok) {
        /* Do error handling */
    }
}
cjsonParserRelease(lpParser);

One can write any JSON element (struct cjsonValue) into an output stream by using the serializer. The serializer supports optional pretty-print which adds formatting that makes human reading of the output simpler. When automatic parsing is desired one should not set the CJSON_SERIALIZER__FLAG__PRETTYPRINT flag.

An callback to write output byte(s) is also required:

static enum cjsonError outputWriterRoutine(
   char* lpData,
   unsigned long int dwBytesToWrite,

   unsigned long int *lpBytesWrittenOut,

   void* lpFreeParam
) {
   /* Do whatever is required to write the bytes */

   /* We always have to update lpBytesWrittenOut! */
   (*lpBytesWrittenOut) = ...;
}

struct cjsonSerializer* lpSerializer;
enum cjsonError e;

e = cjsonSerializer_Create(
   &lpSerializer,
   &outputWriterRoutine,
   NULL, /* Parameter arbitrarily useable by outputWriterRoutine */
   CJSON_SERIALIZER__FLAG__PRETTYPRINT,
   NULL /* One can supply an custom memory allocation interface here */
);

Then any JSON value can be serialized and the serializer can be released:

struct cjsonValue* value;

e = cjsonSerializer_Serialize(lpSerializer, value);
/* Do error handling */

e = cjsonSerializer_Release(lpSerializer);
/* Do error handling */

To determine the type of an struct jsonValue* one can use the following macros:

• cjsonIsNull returns true if the value has been constant null
• cjsonIsTrue returns true if the value has been constant true
• cjsonIsFalse returns true if the value has been constant false
• cjsonIsNumeric returns true if the value has been any of the numeric types
• cjsonIsULong value is represented as unsigned long
• cjsonIsSLong value is represented as signed long
• cjsonIsDouble value is represented as double precision floating point value
• cjsonIsString the JSON element is an arbitrary string
• cjsonIsArray an ordered list of JSON elements
• cjsonIsObject an unordered key-value store

All values can be released via

void cjsonReleaseValue(
    struct cjsonValue* lpValue
);

Arrays are implemented internally as linked list of ordered arrays (i.e. an Arraylist). They can be created empty, new items can then be pushed into the array via the cjsonArray_Push function until it has reached it’s target size.

One can fetch and replace elements in the range returned by cjsonArray_Length via the cjsonArray_Get and cjsonArray_Set functions which adress the elements via their index.

enum cjsonError cjsonArray_Create(
	struct cjsonValue**	lpArrayOut,
	struct cjsonSystemAPI* lpSystem
);
unsigned long int cjsonArray_Length(
	const struct cjsonValue* lpArray
);
enum cjsonError cjsonArray_Get(
	const struct cjsonValue* lpArray,
	unsigned long int 	idx,
	struct cjsonValue** lpOut
);
enum cjsonError cjsonArray_Set(
	struct cjsonValue* 	lpArray,
	unsigned long int 	idx,
	struct cjsonValue* 	lpIn
);
enum cjsonError cjsonArray_Push(
	struct cjsonValue* 	lpArray,
	struct cjsonValue* 	lpValue
);
typedef enum cjsonError (*cjsonArray_Iterate_Callback)(
	unsigned long int index,
	struct cjsonValue* lpValue,
	void* lpFreeParam
);

If one needs to iterate over all elements one can also use the iterator function. This methods calls an callback function of type cjsonArray_Iterate_Callback for every element in the array.

enum cjsonError cjsonArray_Iterate(
	struct cjsonValue* lpValue,
	cjsonArray_Iterate_Callback callback,
	void* lpFreeParam
);

Iterator usage may look like the following sample:

static enum cjsonError jsonArrayIterator(
	unsigned long int index,
	struct cjsonValue* lpValue,
	void* lpFreeParam
) {
	/*
		Do whatever you want with lpValue.
		
		Do not modify the array during iteration!
	*/

    return cjsonE_Ok;
}


...
    e = cjsonArray_Iterate(lpValue, &jsonArrayIterator, NULL);
...

Objects represent unordered key-value stores. They may (if the parser has been instructed to tolerate it) contain multiple values per key but normally when used in RFC conformant mode should provide a unique mapping between keys and values. Values can be any cjsonValue type, keys are always UTF-8 strings. This library does not interpret the key strings in any way. Objects are implemented as hashmaps with a fixed number of buckets that can be tuned via the CJSON_BLOCKSIZE_OBJECT compile time definition. Note that since it’s a hashtable the best case lookup speed is O(1) but the worst case in which all elements are hashed into the same bucket is O(n).

To remove an element one can store NULL at its key.

Access is mainly done via cjsonObject_Set and cjsonObject_Get functions. If one wants to check if a key is present one can use the cjsonObject_HasKey method.

enum cjsonError cjsonObject_Create(
    struct cjsonValue** lpOut,
    struct cjsonSystemAPI* lpSystem
);
enum cjsonError cjsonObject_Set(
    struct cjsonValue* lpObject,
    const char* lpKey,
    unsigned long int dwKeyLength,
    struct cjsonValue* lpValue
);
enum cjsonError cjsonObject_Get(
    const struct cjsonValue* lpObject,
    const char* lpKey,
    unsigned long int dwKeyLength,
    struct cjsonValue** lpValueOut
);
enum cjsonError cjsonObject_HasKey(
    const struct cjsonValue* lpObject,
    const char* lpKey,
    unsigned long int dwKeyLength
);

As with arrays objects provide an easy way to iterate over all contained child objects - and iterator function. Note that the order in which the data is returned is arbitrary.

typedef enum cjsonError (*cjsonObject_Iterate_Callback)(
    char* lpKey,
    unsigned long int dwKeyLength,
    struct cjsonValue* lpValue,
    void* lpFreeParam
);
enum cjsonError cjsonObject_Iterate(
    const struct cjsonValue* lpObject,
    cjsonObject_Iterate_Callback callback,
    void* callbackFreeParam
);

Numeric types are stored internally either as unsigned long, signed long or double precission floating point value. Getting the value as a different type (for example reading an double as unsigned long) leads to loss of precision and information but is possible.

enum cjsonError cjsonNumber_Create(
    struct cjsonValue** lpOut,
    struct cjsonSystemAPI* lpSystem
);
unsigned long int cjsonObject_GetAsULong(
    struct cjsonValue* lpValue
);
signed long int cjsonObject_GetAsSLong(
    struct cjsonValue* lpValue
);
double cjsonObject_GetAsDouble(
    struct cjsonValue* lpValue
);
enum cjsonError cjsonNumber_SetULong(
    struct cjsonValue* lpValue,
    unsigned long int value
);
enum cjsonError cjsonNumber_SetSLong(
    struct cjsonValue* lpValue,
    signed long int value
);
enum cjsonError cjsonNumber_SetDouble(
    struct cjsonValue* lpValue,
    double value
);

enum cjsonError cjsonString_Create(
    struct cjsonValue** lpStringOut,
    const char* lpData,
    unsigned long int dwDataLength,
    struct cjsonSystemAPI* lpSystem
);
char* cjsonString_Get(
    struct cjsonValue* lpValue
);
unsigned long int cjsonString_Strlen(
    struct cjsonValue* lpValue
);

Constants are simply the three allowed JSON constants true, false and null. The boolean constants can be modified via the cjsonBoolean_Set function which can convert a cjsonTrue type into cjsonFalse and vice versa.

enum cjsonError cjsonTrue_Create(
    struct cjsonValue** lpOut,
    struct cjsonSystemAPI* lpSystem
);
enum cjsonError cjsonFalse_Create(
    struct cjsonValue** lpOut,
    struct cjsonSystemAPI* lpSystem
);
enum cjsonError cjsonNull_Create(
    struct cjsonValue** lpOut,
    struct cjsonSystemAPI* lpSystem
);
enum cjsonError cjsonBoolean_Set(
    struct cjsonValue* lpValue,
    int value
);